Remove/Install Panoramic Roof Roller Sun Blind Drive Unit - AR77.21-P-0493MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177
with code 413 (Automatic panoramic sliding sunroof)
Shown on model 177.0 with code 413 (panoramic sliding sunroof)
Fig 1: Panoramic Roof Roller Sun Blind Drive Unit Components Location - Model 118 With Code 413 (Shown On Model 177.0 With Code 413)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Release roof lining in front area until panoramic sliding sunroof roller sunblind drive unit (M12/5) can be accessed. | Model 177.0 with code 413 (Automatic panoramic sliding sunroof) | AR68.30-P-4300MFA |
| Model 118.3, 177.1/9 with code 413 (Automatic panoramic sliding sunroof) | AR68.30-P-4300MFV | ||
| Model 118.6 with code 413 (Automatic panoramic sliding sunroof) | AR68.30-P-4300MFD | ||
| 2 | Release and disconnect electrical connector (1) at panoramic sliding sunroof roller sunblind drive unit (M12/5). | ||
| 3 | Unscrew screws (2) and remove panoramic sliding sunroof roller sunblind drive unit (M12/5). | ||
| 4 | Install in the reverse order. | ||
| Normalizing | |||
| 5 | Normalize panoramic sliding sunroof using vehicle diagnosis system and perform teach-in run for automatic reversing function. | ||
| AD00.00-P-2000-06MFA |