Prepare Panoramic Sliding Roof Frame Body Flange For Installation - AR77.21-P-0801-03MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177
with code 413 (Automatic panoramic sliding sunroof)
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
- Cut down adhesive beads (1) on body flange (2) to a remaining height of approx. 1 to 2 mm using a scraper.
- Remove cutting residues from body flange (2).
- Repair paint damage on body flange (2).
Use only primer filler approved by Daimler AG:
https://xentryportal.i.daimler.com
- Clean adhesive beads (1) on body flange (2).
The cleaner is included in the repair kit.
- Apply activator to body flange (2).
Apply activator only after drying has dried.
Otherwise the strength of the adhesively bonded connection can be impaired and the required adhesion of the adhesive material is not ensured.
The activator is included in the repair kit.