LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2025 >> GLA250 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Sliding Roof, Soft Top, Top Attachments -- 118 Chassis) >> Testing & Repair >> Prepare Adhesive Cartridge For Panoramic Roof - AR77.21-P-1000-01A

Prepare Adhesive Cartridge For Panoramic Roof - AR77.21-P-1000-01A

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All (CAR, smart) 

Topical note  Notes on removal/installation of bonded elements of panoramic roof   AH77.21-P-0001-01A 
Fig 1: Identifying Adapter (000 589 86 63 00)
G11129044Courtesy of MERCEDES-BENZ USA
  1. Remove cartridge from repair kit and heat in cartridge preheater.
  2. Screw application nozzle of repair kit onto cartridge.
  3. SPECIAL TOOL Insert adapter and cartridge into squeeze gun.

    IMPORTANT

    Adhesive material can be pressed out with a commercially available electric squeeze gun or a pneumatic squeeze gun with piston rod.

    IMPORTANT

    To press out cartridge completely, SPECIAL TOOL adapter must be inserted between piston of cartridge and plate on push rod of squeeze gun.