Correct Oil Level In Air Conditioning System In The Event Of Repair Or Slow Refrigerant Loss - AR83.30-P-5251MFD

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 247 with engine 260, 282, 608, 654

Model 118, 177, 247.7 with engine 139

Model 243 with engine 780

MODIFICATION NOTES

24.03.2022

Air conditioning/automatic air conditioning

Model 177.9 except code 2U8 (Alternative refrigerant)

BF83.00-P-1001-01P

	Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant.	Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been drained.	AS83.00-Z-0001-01A
	Risk of fire due to ignition of R1234yf refrigerant on hot components. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with escaped R1234yf refrigerant and when working on pressurized parts. Risk of explosion due to formation of ignitable refrigerant/air mixtures	Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.	AS83.00-Z-0007-01A
	Risk of poisoning caused by inhaling overheated refrigerant vapors from an air conditioning system containing R134a. Risk of injury to skin and eyes caused by contact with liquid R134a refrigerant and when working on pressurized parts	Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated.	AS83.00-Z-0006-01A
Notice	Protect air conditioning circuit and components from moisture when carrying out repair work		AH83.30-P-0005-01KOA
Notice	Procedure for a damaged or leaky air conditioning system		AH83.30-P-0004-01KOA
	Notes on handling refrigerant R1234yf		AH83.30-P-0003-02A
	Notes on handling refrigerant R134a		AH83.30-P-0003-01KOA
	Draining
1	Connect air conditioning service unit and drain air conditioning system.		AR83.30-P-1760MFA
	Measure
2	Determine quantity of refrigerant loss and compare drained refrigerant quantity with the required refrigerant filling capacity.	Model 243 Air conditioning/automatic air conditioning	*BF83.00-P-1001-01T
		Model 118, 177, 247 Air conditioning/automatic air conditioning	*BF83.00-P-1001-01P
	Check
3	Check air conditioning system for leakage.	Model 118, 177, 247	AR83.30-P-1761MFA
		Model 243	AR83.30-P-1761EQA
	Filling
4	Replace drier cartridge.	Model 118, 177, 247.7 with engine 139	AR83.30-P-6521MFG
		Model 118, 177, 247 with engine 260, 282 with code 2U8 (Alternative refrigerant)	AR83.30-P-6521MFA
		Model 118, 177, 247 with engine 608, 654 with code 2U8 (Alternative refrigerant)	AR83.30-P-6521MFE
		Model 243	AR83.30-P-6521EQA
5	Connect air conditioning service unit and evacuate/fill air conditioning system.	Add evacuated quantity of refrigerant oil to the refrigerant circuit again when filling the air conditioning (new compressor oil). If air conditioning system components were replaced, ↓ correct refrigerant oil quantity in air conditioning system after replacing components.	AR83.30-P-1760MFA