Wiper Blade Heater, Basic Function - GF82.30-P-2005A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model All (CAR)
with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system)
Overview
This document contains the following information:
- General
- Function requirement
- Function
General
The wiper blade heater is integrated as foil into the wiper blades.
Function requirement
Engine running or drive train operational
Function
When a voltage is applied, the foil heats up because of the electrical resistance. The heat is used to prevent the washer fluid nozzles in the wiper blades from freezing and to prevent the wiper rubber sticking to the windshield.
Their flexibility is retained by heating up the wiper blades all over.
The wiper blade heater is actuated by the front signal acquisition and actuation module.
| Component description | |||
| Wiper blade/wiper arm hose heater, component description | Model 223 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) | GF82.30-P-9903A | |
| Model 232 with code 874 (MAGIC VISION CONTROL incl. heated windshield washer system) | GF82.30-P-9903F |