202 589 01 31 00 Tensioning Device - WS32.00-P-0040B
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 116, 118, 123, 124, 126, 129, 140, 164, 170, 177, 201, 202, 208, 210, 211, 219, 247
Model 220
with code 979 (Special protection MB Guard)
Model 221, 222
with code Z07 (B7 armoring on special protection version)
Use in FG 32/33/35 Set B
Purpose:
Tensioning device for front axle spring and rear axle spring.
In combination with W 211 589 03 63 00 clamping plate, W 202 589 13 63 00 clamping plates.
Model 177:
In combination with W 164 589 01 63 00 Clamping plates, W 177 589 02 32 00 Adapter.
MODIFICATION NOTES
| 03.08.1994 | Replacement for: 000 589 46 31 00 |
| 202 589 01 31 05 Cylinder pin, dia. 5 mm | Model 116, 123, 124, 126, 129, 140, 164, 170, 201, 202, 208, 210, 211, 219Model 220 with code 979 (Special protection MB Guard) Model 221, 222 with code Z07 (B7 armoring on special protection version) FG/32/Set B |
WS32.00-P-0040-01B |