Bolt Plan For Timing Case Cover - AR01.40-P-8000-01MFG
Engine 139 in model 118, 177, 247
CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | Engine 139 | |||
|---|---|---|---|---|---|
| BA01.40-P-1001-01K | Bolt, timing case cover to crankcase | M6 | Nm | - | |
| M8 | Stage 1 | Nm | 20 | ||
| Stage 2 | Nm | - | |||
| M10 | Nm | - | |||
Loosening procedure
- Remove screws (1 to 17) contrary to the tightening sequence.
Tightening pattern
- Tighten screws (16, 17) slightly by hand.
- Tighten screws (1 to 15) according to the tightening sequence
.
- Tighten screws (16, 17)