LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Front Suspension - 4WD Torsion Bar - Expedition, F150 Pickup & Navigator) >> Torque Specifications

Torque Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Lincoln Navigator, 2001 Ford Pickup, 2001 Ford Expedition, 2000 Lincoln Navigator, and 2000 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint Nuts
Lower 83-112 (113-152)
Upper 57-75 (77-102)
Control Arm Nut
Lower 121-148 (164-201)
Upper 83-112 (113-152)
Front Axle Hub Nut (1) 188-254 (255-345)
Hub & Bearing Assembly-To-Knuckle Bolts 110-148 (149-201)
Lower Shock Absorber Mounting Nut & Bolt 57-75 (77-102)
Skid Plate Bolts 11-12 (15-16)
Stabilizer Bar Bolts/Nuts
Bracket Bolt 19-25 (26-34)
Link End 16-21 (22-28)
Tie Rod End Nut 57-75 (77-102)
Torsion Bar-To-Crossmember
Bolt 29-39 (39-53)
Nut 39-52 (53-71)
Upper Shock Absorber Mounting Bolt 22-29 (30-39)
Wheel Lug Nuts (2) 100 (136)
INCH Lbs. (N.m) 
ABS Sensor Bolt 62-80 (7-9)
ABS Sensor Wire Bracket Bolt 62-80 (7-9)
(1) DO NOT back off retainer nut to install NEW cotter pin. After reaching specification, tighten nut only enough to align slot.
(2) Tighten wheel lug nuts an additional 1/8 to 1/4 turn.