Disassembly And Assembly Of Subassemblies: Countershaft: Disassembly

WARNING: This page is about a different car, the 2010 Ford F550 Super Duty and 2010 Ford F450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: With the exception of the bearings, the countershaft is serviced as an assembly.

NOTE: Install new bearings and cups in a set only. Do not install one without the other.

Fig 1: Locating Bearing Cap Damage Condition

Courtesy of FORD MOTOR CO.

Inspect the bearings for wear or damage. Install new bearings and cups as necessary.
Using the 2 or 3 Jaw Puller, remove the countershaft front bearing.

Fig 2: Removing Countershaft Front Bearing
Courtesy of FORD MOTOR CO.