Transmission Fluid Temperature (TFT) Sensor: Removal
WARNING: This page is about a different car, the 2010 Ford Pickup, 2010 Ford F550 Super Duty, 2010 Ford F450 Super Duty, and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the transmission fluid pan, pan gasket and filter. For additional information, refer to FLUID PAN, GASKET AND FILTER .
- Disconnect the Transmission Fluid Temperature (TFT) sensor.
- Press the tab, rotate the TFT sensor counterclockwise and pull out.
- Inspect the O-ring seal. If the O-ring seal is damaged, install a new TFT sensor.