Engine Coolant Crossover Manifold Assembly, Intake Manifold and Gaskets
WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Coolant Crossover Manifold Assembly And Intake Manifold And Gaskets With Torque Specifications
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Radio ignition interference capacitor electrical connector (part of 12B637) |
| 2 | - | Variable Camshaft Timing (VCT) oil control solenoid electrical connector (part of 12B637) |
| 3 | - | Engine wiring harness retainers (part of 12B637) |
| 4 | 9A474 | Intake manifold vacuum tube |
| 5 | - | Electrical wiring harness retainers (part of 12B637) |
| 6 | W709775 | Intake manifold bolt (10 required) |
| 7 | W503282 | Engine coolant crossover manifold assembly bolt (3 required) |
| 8 | 8C369 | Engine coolant crossover manifold assembly |
| 9 | 8C387 | RH engine coolant crossover manifold assembly gasket |
| 10 | 8C388 | LH engine coolant crossover manifold assembly gasket |
| 11 | 9424 | Intake manifold |
| 12 | 9439 | RH intake manifold gasket |
| 13 | 9441 | LH intake manifold gasket |