Special Tool(s)
WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL REFERENCE
| 3 Jaw Puller 303-D121 |
|
| Compressor, Valve Spring 303-1039 |
|
| Engine Lifting Bracket 303-F047 (014-00073) or equivalent |
|
| Fan Clutch Nut Wrench 303-240 (T84T-6312-D) |
|
| Fan Pulley Holding Wrench 303-239 (T84T-6312-C) |
|
| Installer, Connecting Rod 303-442 (T93P-6136-A) |
|
| Locking Tool, Cam Phaser 303-1046 |
|
| Remover, Crankshaft Front Oil Seal 303-107 (T74P-6700-A) |
|
| Remover, Crankshaft Rear Oil Seal 303-519 (T95P-6701-DH) |
|
| Remover, Crankshaft Rear Oil Slinger 303-514 (T95P-6701-AH) |
|
| Remover/Installer, Cylinder Head 303-572 (T97T-6000-A) |
|
| Slide Hammer 100-001 (T50T-100-A) |