LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2746 (Engine Mechanical - 5.4L (3V) -- F250-F350 Super Duty) >> Disassembly And Assembly Of Subassemblies >> Intake Manifold Assembly >> Disassembly

Intake Manifold Assembly: Disassembly

WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 bolts and the Throttle Body (TB).
  2. Remove the 4 bolts and the fuel rail.
  3. Remove the 8 fuel injector-to-fuel rail locking clips and separate the 8 fuel injectors from the fuel rail.
    • Discard the 2 O-ring seals from each fuel injector.
  4. Remove the clamp and vacuum tube assembly from the intake manifold.
  5. Remove the 2 bolts and the PCV fitting.
scientia non olet · About LEMON Manuals