Special Tool(s)

WARNING: This page is about a different car, the 2010 Ford Pickup and 2010 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL REFERENCE

Courtesy of FORD MOTOR CO.	Alignment Pins, Cylinder Head 303-1040 (SR-015486)
Courtesy of FORD MOTOR CO.	Compressor, Piston Ring 303-D032 (D81L-6002-C) or equivalent
Courtesy of FORD MOTOR CO.	Compressor, Valve Spring 303-1039
Courtesy of FORD MOTOR CO.	Engine Lifting Bracket 303-F047 (014-00073) or equivalent
Courtesy of FORD MOTOR CO.	Fan Clutch Nut Wrench 303-240 (T84T-6312-D)
Courtesy of FORD MOTOR CO.	Fan Pulley Holding Wrench 303-239 (T84T-6312-C)
Courtesy of FORD MOTOR CO.	Holding Tool, Crankshaft 303-448 (T93P-6303-A)
Courtesy of FORD MOTOR CO.	Installer, Connecting Rod 303-442 (T93P-6136-A)
Courtesy of FORD MOTOR CO.	Installer, Crankshaft Front Oil Seal 303-635
Courtesy of FORD MOTOR CO.	Installer, Crankshaft Rear Oil Seal 303-516 (T95P-6701-EH)
Courtesy of FORD MOTOR CO.	Installer, Crankshaft Rear Oil Seal 303-518 (T95P-6701-DH)
Courtesy of FORD MOTOR CO.	Installer, Crankshaft Rear Oil Slinger 303-517 (T95P-6701-CH)
Courtesy of FORD MOTOR CO.	Installer, Crankshaft Vibration Damper 303-102 (T74P-6316-B)
Courtesy of FORD MOTOR CO.	Installer, Front Cover Oil Seal 303-335 (T88T-6701-A)
Courtesy of FORD MOTOR CO.	Locking Tool, Cam Phaser 303-1046
Courtesy of FORD MOTOR CO.	Remover/Installer, Cylinder Head 303-572 (T97T-6000-A)