Intake Manifold: Notes
WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item |
|---|
| Motorcraft Metal Surface Prep ZC-31-A |
| Silicone Gasket Remover ZC-30 |
| Item | Part Number | Description |
|---|---|---|
| 1 | 9F792 | Radiator hose |
| 2 | W705800 | Radiator hose clamp |
| 3 | 9229 | Heater hose |
| 4 | - | Heater hose clamp |
| 5 | 9229 | PCV coolant hose |
| 6 | - | PCV coolant hose clamp |
| 7 | - | Intake Manifold Runner Control (IMRC) actuator electrical connector (part of 12B637) |
| 8 | - | Fuel rail pressure and temperature sensor vacuum hose (part of 9D446) |
| 9 | - | Fuel rail pressure and temperature sensor electrical connector (part of 12B637) |
| 10 | - | Fuel injector electrical connector (10 required) (part of 12B637) |
| 11 | 9229 | PCV coolant hose |
| 12 | - | PCV coolant hose clamp |
| 13 | 6K817 | PCV tube |
| 14 | - | Engine vacuum hose |
| 15 | - | PCV coolant hose clamp |
| 16 | 9229 | PCV coolant hose |
| 17 | - | Intake manifold vacuum hose |
| 18 | - | Engine wiring harness retainer (part of 12B637) |
| 19 | - | Electronic Throttle Control (ETC) electrical connector (part of 12B637) |
| 20 | - | Evaporative Emission (EVAP) tube quick connect coupling |
| 21 | - | Throttle Position (TP) sensor electrical connector (part of 12B637) |
| 22 | - | Engine wiring harness retainer (part of 12B637) |
| 23 | - | Crankcase ventilation tube |
| 24 | - | Engine wiring harness retainer (part of 12B637) |
| 25 | - | Engine vacuum harness retainer (part of 9D446) |
| 26 | W709775 | Intake manifold bolt (12 required) |
| 27 | W503282 | Engine coolant crossover assembly bolts (2 required) |
| 28 | 9E498 | Engine coolant crossover assembly gaskets (2 required) |
| 29 | 14A464 | Engine coolant crossover assembly |
| 30 | - | Intake manifold gaskets (2 required) |
| 31 | 9Y451 | Intake manifold assembly |