LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2368 (Engine Mechanical - 5.4L (3V) -- F250-F550 Super Duty) >> In-Vehicle Servicing >> Crankshaft Rear Seal With Retainer Plate >> Removal

Crankshaft Rear Seal With Retainer Plate: Removal

WARNING: This page is about a different car, the 2009 Ford Pickup and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil pan. For additional information, refer to Oil Pan .
  2. Using the special tools, remove the crankshaft oil slinger.
    • Discard the crankshaft oil slinger.
    3. Fig 1: Removing Crankshaft Rear Oil Seal Slinger
    G03920149Courtesy of FORD MOTOR CO.
  3. Using the special tools, remove the crankshaft rear seal.
    • Discard the crankshaft rear seal.
    4. Fig 2: Removing Crankshaft Rear Seal
    G03920150Courtesy of FORD MOTOR CO.
  4. Remove the 6 bolts and the crankshaft rear seal retainer plate.
scientia non olet · About LEMON Manuals