LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2356 (Brake Booster System - Power Brake Actuation - F250-F550 Super Duty) >> Removal And Installation >> Brake Vacuum Pump >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessory drive belt. For additional information, refer to ACCESSORY DRIVE article.
  2. Remove the 3 vacuum pump bolts.
    • To install, tighten to 48 Nm (35 lb-ft).
  3. Disconnect the vacuum hose and remove the vacuum pump.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals