LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2353 (Information Center - Instrumentation, Message Center, & Warning Chimes -- F250-F550 Super Duty) >> General Procedures >> Compass Calibration

Compass Calibration

WARNING: This page is about a different car, the 2009 Ford Pickup, 2009 Ford F550 Super Duty, 2009 Ford F450 Super Duty, and 2009 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (heated rear window, heater, A/C, map lamps, wiper, etc.) and make sure all the doors are closed.
  1. Start the vehicle.
  2. Press the message center SETUP button until RESET FOR CALIBRATION is displayed.
  3. NOTE: The message center displays CIRCLE SLOWLY TO CALIBRATE in the calibration function.
  4. Press the RESET control button to start the compass calibration function.
  5. NOTE: This step may require up to 5 circles to complete the calibration.
    NOTE: If the RESET button is pressed during the calibration or 3 minutes has elapsed since the beginning of the calibration without driving the vehicle, the message center reverts back to normal operation and the INFO displays CAL until a successful calibration is carried out.
  6. Slowly drive the vehicle in a circle less than 5 km/h (3 mph) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETED.