Setup Displays
The setup displays are timed modes and terminate after a finite interval. As part of the setup menu, the message center has the capability to configure items such as units (English or metric), autolamp delay or to enable/disable options such as auto lock.
On configurable items such as auto lock, the message center indicates the appropriate selection (ON/OFF) by bracketing the selection. For example, if the driver selects the auto lock feature on, the message would display as follows: AUTOLOCK <ON> OFF. If the driver selects the auto lock off, the message would display as follows: AUTOLOCK AID ON <OFF>. For additional information on configurable items, refer to the Owner's Literature.
The base instrument cluster setup display modes are:
- Units (English/metric)
- Language
- System check
The message center cluster setup display modes (SETUP button on message center clusters) are:
- Oil life status
- System check
- Autolamp (delay in seconds)
- Auto lock (on/off) (except manual transmission)
- Compass zone
- Compass calibration