LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2024 >> eSprinter Base, _NA_ >> Repair and Diagnosis >> External Pages >> Different car >> Section 2121 (Front Suspension - Rear Wheel Drive (RWD) -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Installation

Wheel Studs - Single Rear Wheel (SRW): Installation

WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the new wheel stud in the wheel hub and brake disc assembly, aligning the serrations in the disc brake rotor flange made by the original wheel stud.
  2. Using a suitable press, install the new wheel stud.
    3. Fig 1: Installing Wheel Stud - Disc-Type Wheels
    GF0006119Courtesy of FORD MOTOR CO.
  3. Install the wheel hub and brake disc assembly. For additional information, refer to Wheel Bearing and Wheel Hub - F-250, F-350 .
scientia non olet · About LEMON Manuals