Remove/Install Charge Air Pipe Downstream Of Turbocharger - AR09.41-P-1333MFC
Engine 260 in model 118, 177, 247
with code M016 (Uprated Engine)
Fig 1: Charge Air Pipe Downstream Of Turbocharger Components Location - Engine 260 In Model 247 With Code M016
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Remove/install | |||
| 1 | Unclip electrical line (5) from the brackets (4). | ||
| 2 | Remove electrical connector (3) from the charge air pipe (1). | ||
| 3 | Release screw clamp (2). | *BA09.41-P-1003-01KOA | |
| 4 | Remove screw (6) and remove bracket (7). | *BA09.41-P-1002-01KOA | |
| 5 | Remove charge air pipe (1). | ||
| 6 | Seal openings using protective cover. | Fig 2 | |
| 7 | Install in the reverse order. | ||
| Risk of accident from vehicle starting off by itself when Engine running. Risk of injury (bruises and burns) resulting from working on the Engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 8 | Perform Engine test run. While doing so, check Engine for proper operation and leak tightness | ||
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 260.9 | |
|---|---|---|---|
| BA09.41-P-1002-01KOA | Holder, charge air line to exhaust gas turbocharger | Nm | 8 |
CHARGE AIR PIPE/CHARGE AIR COOLING
| Number | Designation | Engine 260.9 | |
|---|---|---|---|
| BA09.41-P-1003-01KOA | Clamp, boot to charge air line/charge air cooler | Nm | 4 |