000 588 33 19 00 Inclinometer - WS26.00-P-0416B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Transmission All (4xWD, CAR, Heavy transporter, Light transporter)

Use in FG 26/27/28/41/Set B

Purpose:

Electronic inclinometer for measuring angles at defined contact points.

Test equipment category CAT_A.

Procurement information:

This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance

Courtesy of MERCEDES-BENZ USA

NOTE: Device 09935-10 is the basic unit used for determining the articulation angle.

The combined measuring equipment with article number 09905-30 also has a measuring mode for determining the vehicle level.

Manufacturer

ROMESS Rogg Apparate + Electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Type/model: Electronic inclinometer Article no.: 09935-10