000 588 05 90 00 Clamping Grommet - WS00.00-P-0036B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All

Use in FG 00/Set B

Model 100, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 123, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 201, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 242, 245, 246, 251, 253, 292

Purpose:

Clamp grommet for suctioning off exhaust on vehicle.

Technical note:

Inner tube clamping

Procurement information:

This workshop equipment is not distributed through the regular replacement part ordering process in GLC/LC, but directly from the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found in the WS document (see below).

Manufacturer 1

Nederman GmbH

Nurtinger Straβe 50

73257 Kongen

Germany

http://www.nederman.de

Type/model: Inner tube clamping
Article no.: 20867661

Courtesy of MERCEDES-BENZ USA

Manufacturer 2

NORFI Absaugtechnik GmbH

Kelterstraβe 65

72669 Unterensingen

Germany

http://www.norfi.de

Type/model: Inner tube clamping
Article no.: 25-4950-100