Function Schematic For Actuating Air Distribution Flaps - PE83.10-P-2501-97A
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 243, 247
| Code: | Designation: | Position: |
|---|---|---|
| A26/17 | Head unit | 1D |
| B10/31 | Left side outlet temperature sensor | 8F |
| B10/32 | Right side air outlet temperature sensor | 8G |
| B10/35 | Left footwell temperature sensor | 8G |
| B10/36 | Right footwell temperature sensor | 8H |
| B14 | Outside temperature display temperature sensor | 3L |
| B38/2 | Rain/light sensor | 7J |
| Code 545 | Connect 5 (NTG6) | 1B |
| Code 547 | Connect 20 Entry (NTG6) | 1C |
| Code 548 | Connect 20 MID (NTG6) | 1D |
| Code 549 | Connect 20 HIGH (NTG6) | 1D |
| Code 581 | Comfort automatic air conditioning | 7G |
| Code 581 | Comfort automatic air conditioning | 29J |
| Code 581 | Comfort automatic air conditioning | 3H |
| M2/4 | Central air distribution actuator motor | 30H |
| M2/5 | Fresh air/air recirculation flap actuator motor | 30H |
| M2/6 | Left blending air flap actuator | 30J |
| M2/7 | Right blending air flap actuator | 30H |
| N2/10 | Supplemental restraint system control unit | 22K |
| N10 | Central control module | 22F |
| N58/1 | Climate control operating unit | 30E |
| N58/1 | Climate control operating unit | 1B |
| N70 | Overhead control panel control unit | 13F |
| N73 | EIS [EZS] control unit | 12C |
| N127 | Drivetrain control unit | 4F |
| N166 | Head unit/instrument cluster control unit | 1C |
| S24/1 | Central air distribution position detection microswitch | 3J |
| U1199 | Valid for vehicles up to facelift | 6B |
| U1200 | Valid for vehicles as of facelift | 6C |
| CAN B | Interior CAN | 18C |
| CAN B | Interior CAN | 18F |
| CAN HMI | User interface CAN | 8C |
| CAN HMI2 | CAN 2 for user interface | 8D |
| Flex E | Chassis FlexRay | 8E |
| LIN B8-3 | AC operation LIN | 18B |
| LIN B8-3 | AC operation LIN | 26E |
| LIN B8-3 | AC operation LIN | 8B |
| LIN B8-5 | A/C actuator motors LIN | 26G |
| LIN B16 | Rain and light sensor LIN | 11J |
| LIN B16 | Rain and light sensor LIN | 18J |
| 1 | Operation, signal | 21C |
| 1 | Operation, signal | 11B |
| 1 | Operation, signal | 21A |
| 1 | Operation, signal | 11D |
| 2 | Circuit 15, status | 20C |
| 2 | Circuit 15, status | 11E |
| 3 | Interior temperature, signal | 21E |
| 4 | Air outlet temperature sensor, signal | 21G |
| 5 | Central air distribution position detection microswitch, status | 21H |
| 6 | Dew point temperature, signal | 21J |
| 7 | Solar radiation, signal | 20J |
| 8 | Outside temperature, signal | 21K |
| 9 | Crash, signal | 23G |
| 10 | Air conditioning, status | 28E |
| 11 | Actuator motors, actuation | 28G |