Remove/Install Parktronic System (PTS) Sensors In Rear Bumper - AR54.65-P-0002MFA
Model 118, 247
with code 235 (Parking Pilot with PARKTRONIC)
Model 177
with code 235 (Active Parking Assist with PARKTRONIC)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear bumper (1) | AR88.20-P-2200MFA | |
| 2 | Release and disconnect electrical connectors (2) | ||
| 3 | Pull locks (3) lightly outwards and remove rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12) from bumper (1) | ||
| Check | |||
| 4 | Check respective seal of rear parking system distance sensors (B8/7, B8/8, B8/9, B8/10, B8/11, B8/12). | In the event of complaints ↓ Replace corresponding seal. |
|
| 5 | Install in the reverse order |