Remove/Install Panoramic Sliding Roof Motor - AR77.21-P-6995MFB
Model 243, 247
with code 413 (Panoramic sliding sunroof/glass roof)
Shown on model 247
| Remove/install | |||
| 1 | Remove headliner. | AR68.30-P-4300MFA | |
| 2 | Release electrical connector (1) and disconnect. | ||
| 3 | Remove screws (2) and remove panoramic sliding sunroof drive unit (M12). | ||
| 4 | Install in the reverse order. | ||
| 5 | Perform commissioning of panoramic sliding sunroof drive unit (M12). | When replacing panoramic sliding sunroof drive unit (M12). | |
| AD00.00-P-2000-06MFA | |||
| Normalizing | |||
| 6 | Normalize panoramic sliding sunroof with vehicle diagnostic system and perform teach-in process for automatic reversing function. | ||
| AD00.00-P-2000-06MFA |