Repairing Cable Harness By Soldering - Ar00.19-D-0100-05A

AR00.19-D-0100-05A	Repairing cable harness by soldering
	Risk of injury.  Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A

MODEL ALL 

Fig 1: Welding Bead Catcher (129 589 01 98 00)

Fig 2: Wire Stripper (220 589 01 99 40)

1. Strip wire (1) using wire stripper.

   Do not damage, bend or twist wires.

   Otherwise, a correct connection will not be assured.

   Use unleaded solder.

2. Fill solder contact (2) with soldering paste in soldering area.
3. Insert wire (1) into solder contact (2).
4. Solder wire (1) and solder contact (2) with soldering iron and welding pearl catcher using unleaded solder (3).

   Solder (3) must run evenly and completely into the solder connection.

5. Clean residues from soldering join and contact.