Risk Of Injury. Rubber Mounts And Bearing Parts Can Suddenly Come Loose During Installation/Removal And Shoot Wildly Through The Air. - As00.00-Z-0014-01A

Shield hazard area with suitable catch device (basket, iron-barred box). Also ensure that no unauthorized persons are present in the hazard area. 

MODEL ALL 

Risk of injury 

When installing and removing tight transverse control arm mounts, the rubber mounts can be subjected to extremely high tension. If one of the mounts is released suddenly, it can shoot out of the mounting hole, hitting and injuring anyone in the immediate area.

Safety precautions/instructions 

• When pressing parts in and out, ensure that no one is in the immediate vicinity and therefore in the hazard area, except for the person performing the work.
• Also secure the pressing point (hazard area) with a suitable catch device (basket, iron-barred box).
• When pressing out, loosen mount by tapping a number of times with a hammer. Perform the pressing out procedure in several intervals, loosening the mount from time to time.