Remove/Install Center Air Vent On Instrument Panel - Ar83.10-D-4505TS

Model 907 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove
1	Insert extraction hook (4) into opening (3) on air vent (1)	Extraction hook	Fig 1
2	Using extraction hook (4) pull air vent (1) out of trim (2)	Make sure that the retaining clamps remain on the rear of the air vent (1).
	Install
3	Insert the air vent (1), with the marking "Top" facing upwards into the trim (2) until it fully engages

Fig 1: Extraction Hook (140 589 02 33 00)