Remove/Install Upper Window Frame Lining For Middle Window In Side Wall - Ar68.30-D-0028TSR

Model 907.6/7 

Shown on model 907.7 on the left side of the vehicle with code IR6 (wheelbase 4,325 mm, overhang 1,615 mm) with code V21 (luxury interior trim), with code UD6 (passenger compartment seating, 4-seater bench 3rd row) and except T19 (left sliding door) for removed passenger bench seats 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Release roof linings (2, 3) at the retaining tabs (arrows) from the side wall in the area of the center window.
2	Release edge guard (4) in the area of the window frame lining (1).
3	Lift window frame lining (1), pry off, and remove.	: Ensure that the window frame lining (1) overlaps the window frame linings (5, 6) and is aligned centrally. The window frame lining (1) is bonded to the side wall using tape.
		Long wedge	Fig 1
4	Remove masking tape residues from the side wall with a suitable tool.	Cleaner	*BR00.45-Z-1025-04A
5	Remove masking tape residues from the window frame lining (1) with a suitable tool.	When reusing the window frame lining (1).
		Cleaner	*BR00.45-Z-1025-04A
6	Attach new adhesive tape strips to the window frame lining (1).	When reusing the window frame lining (1). Ensure that the adhesive strips are positioned in the same way as the adhesive strips that were removed previously. Otherwise adhesion problems may occur.
		Double-sided tape with polyethylene foam support, Scotch-Mount 9528	*BR00.45-Z-1197-02A
7	Install in the reverse order

Fig 1: Long Wedge (115 589 03 59 00)