Remove/Install Lower Center Stowage Compartment On Instrument Panel - Ar68.10-D-1513TS

Model 907 

Shown on model 907 with code G42 (7G TRONIC PLUS) and with code T55 (Electrical actuation for right sliding door) 

Shown on model 907 with code GD8 (6-speed manual transmission ECO Gear 360) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Unclip gearshift lever boot (3) from stowage compartment (1).	Model 907 with code GD8 (6-speed ECO Gear 360 manual transmission) Model 907 with code GD9 (6-speed manual transmission ECO Gear 480) Model 907 with code GE2 (6-speed manual transmission ZF EL 55)
		Clip remover	Fig 1
2	Unclip stowage compartment (1) in the direction of the arrow.	Clip remover	Fig 1
3	Remove stowage compartment (1) until electrical connector (2) can be accessed.	Model 907 with code T55 (Electric operation of sliding door on right) Model 907 with code T56 (Electric operation of sliding door on left)
4.1	Disconnect electrical connector (2) and remove stowage compartment (1).	Model 907 with code T55 (Electric operation of sliding door on right) Model 907 with code T56 (Electric operation of sliding door on left) Depending on the vehicle equipment, an additional electrical connector can be present.
4.2	Remove stowage compartment (1).	Model 907 except code T55 (Electric operation of sliding door on right) except code T56 (Electric operation of sliding door on left) Model 910
5	Remove button for electric sliding door from stowage compartment (1).	Model 907 with code T55 (Electric operation of sliding door on right) Model 907 with code T56 (Electric operation of sliding door on left) When replacing stowage compartment (1).
			AR54.25-D-0006TSR
6	Install in the reverse order.
	Check
7	Perform function test of button for electric sliding door.	Model 907 with code T55 (Electric operation of sliding door on right) Model 907 with code T56 (Electric operation of sliding door on left)

Fig 1: Clip Remover (452 589 01 63 00)