Check Propeller Shaft Flex Disks For Signs Of Damage And Deformation - AP41.10-S-4152E
Model 907
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury . Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Preparatory activity | |||
| 1 | Lift/jack up vehicle | ||
| Model 907 | AR00.60-D-1000-04TS | ||
| Check | |||
| 2 | Check drive shafts for cracks, deformation, corrosion, and check for play by firmly pulling and pushing. | If problems occur, ↓ rectify the problems. |
|
| 3 | Check drive shaft boots and clamps for condition, leak tightness and correct seating. | If problems occur, rectify the problems. |
|
| 4 | Check flex disks for crack formation, wear, damage and deformation. | If problems occur, ↓ rectify the problems. |
|
| 5 | Check propeller shaft flange for crack formation, wear, damage and deformation. | If problems occur, ↓ rectify the problems. |
|
| 6 | Check propeller shaft intermediate bearing for mounting, crack formation, wear, damage and deformation. | If problems occur, ↓ rectify the problems. |
|
| Finishing activity | |||
| 7 | Lower vehicle. | ||
| Model 907 | AR00.60-D-1000-04TS |