Check Underfloor Protection - AP97.20-D-0641TS

Model 907 with body 613.734/738/834/838 

with code ZJ8 (Configuration Mercedes-Benz Minibus (MBM)  )

	Risk of explosion and poisoning  caused by solvent vapors and gasses. Risk of injury  to skin and eyes when working with anticorrosion agents	Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.	AS97.00-Z-0001-01A
	Check
1	Visual inspection of underbody protection coating.	If the coating is damaged, ↓ repair damaged points. After obtaining special order.
	Repair
2	Clean damaged areas.	Carefully clean underbody. The underbody protection can be damaged if the underbody is not cleaned properly. When cleaning using a high pressure cleaner, ensure that the water temperature is max. 60 °C. Ensure that the water pressure is between 50 - 60 bar and the distance between the lance and the surface being cleaned is not less than 30 cm.
3	Remove any corrosion.
4	Coat bare metal areas.	With commercially available 2K EP primer The points to be coated must be completely dry.
5	Apply underbody protection evenly using a brush.	Underbody protection Tectyl 5750 W (20 l)	*BR00.45-Z-1029-05A