Risk Of Injury Caused By Slipping When Clamping Blade In The MULTICUTTER And By Splinters When Cutting Out Bonded Windows - As65.00-Z-0003-01A

Wear protective gloves and safety glasses. 

MODEL 204.3, 207, 212, 219.3, 415, 454.0, 906 

Risk of injury 

When clamping or unclamping the blade for the special electric cutter or multicutter, cut injuries may occur if the tightening wrench slips or if the special electric cutter or multicutter is switched on unintentionally.

Injuries to eyes and hands may be caused by flying splinters when cutting out bonded components.

Safety instructions/precautions 

• Ensure that air or power supply is cut off when clamping or unclamping the blade for the special electric cutter or multicutter.
• Wear protective gloves.
• Wear safety glasses when cutting out window.