LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> Sprinter 2500 Van Cargo Extended, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System, Equipment & Instructions - Description & Operation, Location, Gen Info & Basic Knowledge >> Basic Knowledge >> Signal Concept, PSM, Function - GF54.21-D-2000TSA

Signal Concept, PSM, Function - GF54.21-D-2000TSA

Model 907 

with code ED5 (Parameterisable special module) 

Signal path in parameterizable special module (PSM) control unit (N26/15) 

G13792257

Function overview and brief description of signal pool 

The signal pool contains signals for free use by the customer and for internal functions. The signal sources are:

The signals are available as a bit, byte, data word ("Word") (2 bytes), double word ("DWord") (4 bytes), signed double word ("signed DWord") (2 bytes) and signed double word ("signed DWord") (4 bytes).

Every signal has a unique 2 byte identification number of the signal (signal ID).

Each signal has one source only. A signal can be used in none of the outputs, one of the outputs or in several outputs as well as internally.

Each signal, before it is written into the signal pool, is checked by the source for plausibility and validity. The signal pool is specific to the model series.

Signal pool input 

Each signal has just one source.

Signal pool output 

Each signal can be assigned through coding to one or more outputs as well as be used internally. Individual signals can be dependent on other signals, e.g. terminal 15.

Status indication 

The value of each signal CAN can be shown through the "Display signal values" menu item in XENTRY Diagnostics. The menu item is available in the "Actual values" tab and in the expert coding.

Special signals 

The following special signals exist:

Overview of system components for parameterizable special module (PSM) GF54.21-D-9998TSA