Remove/Install Upper Trim On Partition - Ar68.30-D-1407TS
Model 907.6
Shown on model 910.6 with code D50 (Full-width partition wall)
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Remove/install | |||
| 1 | Adjust driver's seat forwards to topmost position. | ||
| 2.1 | Adjust front passenger seat forwards to topmost position. | Model 907.6 except code S23 (Co-driver's seat double seat) |
|
| 2.2 | Remove head restraints of front passenger bench seat. | Model 907.6 with code S23 (Co-driver's seat double seat) |
|
| AR91.16-D-0041TS | |||
| 3 | Remove clothes hooks. | Model 907.6 with code F1K (Coat hook in cab) |
|
| 4 | Remove expansion rivets (2). | ||
| Fig 1 | |||
| 5 | Guide trim (1) on driver's side out of B-pillar trim and remove from vehicle. | ||
| 6 | Remove sealing lip at window cutout of trim (1). | Model 907.6 with code V07 (Rear wall panelling) When replacing paneling (1). |
|
| 7 | Install in the reverse order. |