Check Interior Lamp - AP54.00-D-5451-03TS

Model 907 

Shown with code LD0 (Overhead control panel with two reading spotlights) and with code HK4 (Rear A/C, enhanced) 

1. Check interior lights (1) at front and rear.
2. With code LD0 (Overhead control panel with two reading spotlights) Check reading lights (2).
3. Check glove compartment lamp.
4. With code LC2 (LED light strip in load compartment) Check LED light strips in load compartment.
5. Check all further interior and load compartment lamps.

   Depending on equipment installed, further interior lights can be installed e.g. in the beverage holders, in the handle recess shells and in the entrance area of the doors and sliding doors.