Subsequently Fasten Brake Light Switch Wiring Harness (Code: Vs3VELEBRE, Acc. No.: 82 920 72) - SM54.18-D-0073SG

Model 907 

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
L	02 2735	Operations: Subsequently fasten brake light switch wiring harness	-	82 920 72	VS3VELEBRE

Incorrect routing of Hermes electrical wiring harness (1) shown 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Check
1	Check whether vehicle is affected by measure	Affected vehicles: Subsequently fasten brake light switch wiring harness (code: VS3VELEBRE, acc. no.: 82 920 72) Model 907.### ## as of 001001 up to 007680	SM54.18-D-0073-01AAA
2	Check whether the Hermes electrical wiring harness (1) is trapped between brake pedal (2) and brake light switch (5).	If the Hermes electrical wiring harness (1) is trapped. ↓ Operate brake pedal (2) and remove Hermes electrical wiring harness (1) from operating area of the brake pedal (2).
	Correct mounting
3	Secure Hermes electrical wiring harness (1) again.	For this, secure Hermes electrical wiring harness (1) at the electrical wiring harness (3) on the basis of dimension (a) after cable tie (4 with a further cable tie.

PARTS ORDERING NOTE

Part no.	Designation	Quantity
A 002 997 24 90	Cable tie	1