Subsequently Activate Traffic Sign Assist (Code: Vs3ZEICHEN, Acc. No.: 54 952 83) - SM54.30-D-0033SG

Model 907.### ## as of 000338 up to 003490 with code JA9 (Traffic Sign Assist)

Operation no. of the operation texts or standard texts and flat rates
Category	Op. no.	Operation text	Time	Acc. no.	Code
L	02 2505	Operations: Subsequently activate Traffic Sign Assist	-	54 952 83	VS3ZEICHEN

	Notes on SCN coding of control units		AH54.21-P-0004-01X
	Check
1	Check whether vehicle is affected by measure.	Affected vehicles: Subsequently activate Traffic Sign Assist (Code: VS3ZEICHEN, Acc. no.: 54 952 83) Model 907.### ## as of 000338 up to 003490	SM54.30-D-0033-01AAA
		Affected vehicles: Subsequently activate Traffic Sign Assist (Code: VS3ZEICHEN, Acc. no.: 54 952 83) Model 910.### ## as of 000423 up to 001298 For authorized Mercedes-Benz service partners, only the entry in the Extended VEGA Application (EVA) edition, in the "Current" tab is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.	SM54.30-D-0033-01AAB
	SCN coding
2	Connect charging equipment.
	000 588 00 81 00 Charger		WS54.00-P-0037B
		During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle's on-board electrical system. Otherwise any undervoltage that occurs may damage the control units. Follow the operating instructions for the charger. Use the charger to ensure that an adequate power supply (min. 12.5 V) is provided for the on-board electrical system battery.
3	Connect diagnostic system.
			AD00.00-D-2000-06TS
4	Perform SCN coding in head unit control unit.	See process description in diagnostic system "INFO".
5	Perform SCN coding in Electronic Stability Program (ESP®) control unit.	See process description in diagnostic system "INFO".
6	Perform SCN coding in instrument cluster control unit.	See process description in diagnostic system "INFO".
7	Disconnect diagnostic system.
			AD00.00-D-2000-06TS
8	Remove charger from vehicle.