Remove/Install Seat Backrest Cover On 3rd Seat Row - AR91.18-P-0002MEX
Model 167.9
with code 845 (Electrically folding 3rd seat row)
Shown on right 3rd rear seat row seat
| Remove/install | |||
| 1 | Remove 3rd rear seat row seat. | AR91.12-P-0007MEX | |
| 2 | Remove rear seat backrest trim (1). | Fig 2 | |
| 3 | Remove covers (2, 3). | Fig 1 | |
| 4.1 | Move head restraint (4) to top position, push button on head restraint guide and lift out head restraint (4). | Model 167.9 with code 845 (Electrically folding 3rd seat row) except code 226 (7-seater with 3rd seat row) |
|
| 4.2 | Remove head restraint (4). | Model 167.9 with code 226 (7-seater with 3rd seat row) with code 845 (Electrically folding 3rd seat row) |
AR91.16-P-0005MEX |
| 5 | Remove head restraint guides (5). | AR91.16-P-0006MEX | |
| 6 | Expose electric line of seat backrest heater pad. | Model 167.9 with code 845 (Electrically folding 3rd seat row) with code 886 (Seat heater for 3rd seat row) |
|
| 7 | Detach seat backrest cover (6) from seat backrest frame. | Fig 2 | |
| 8 | Remove seat backrest cover (6) together with seat backrest padding (7) from seat backrest frame. | ||
| 9 | Release seat backrest cover (6) far enough from seat backrest padding (7) until staple clips are accessible. | ||
| 10 | Separate staple clips at attachment points (arrows) and remove remaining pieces from seat backrest padding (7). | Carefully remove the remaining pieces of staple clips. Otherwise the seat backrest padding (7) and the seat backrest cover (6) will be damaged. |
Fig 3 |
| 11 | Remove seat backrest cover (6) from seat backrest padding (7). | ||
| 12 | Remove staple wires (8) from seat backrest cover (6). | When replacing seat backrest cover (6). | |
| 13 | Install in the reverse order. |