Remove/Install Left Or Right Seat Belt In Rear Passenger Compartment - AR91.40-P-0682MEM

Model 167.9 

With Code M036 (Maybach Version) 

Courtesy of MERCEDES-BENZ USA

Shown with code 224 (Design individual rear seat system) 

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100°C or 212°F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
	Risk of injury  . Injury may result when the tension in the spring in the automatic belt retractor is released.	Never disassemble automatic belt retractors.	AS91.00-Z-0002-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Disconnect ground line from on-board electrical system battery.		AR54.10-P-0003ME
2	Remove front part of rear shelf.		AR68.30-P-0031MEM
3	Remove rear seat cushion.		AR91.12-P-1021MEM
4	Remove screw (1) and remove seat belt end fitting.	Bolt/nut for rear belt end fitting	*BA91.40-P-1005-01U
5	Remove damping over seat belt retractor (2).
6	Release and disconnect electrical connection (3).	Removal lever	Fig 1
7	Remove nut (4).	Screw/nut, rear seat belt retractor	*BA91.40-P-1006-01U
8	Release seat belt guide in front of seat belt retractor (2) and fold upward.
9	Remove seat belt retractor (2) with seat belt (5).
10	Install in the reverse order.
11	Check Supplemental Restraint System (SRS) using vehicle diagnosis system.
			AD00.00-P-2000-06ME

Fig 1: Identifying Removal Lever (203 589 04 33 00)

Courtesy of MERCEDES-BENZ USA