Remove/Install Engine Covers - AP01.10-P-2405-01F

Engine 256.9 In Model 167, 257, 290 

Shown on Engine 256.9 In Model 167.159 

Courtesy of MERCEDES-BENZ USA

Shown on engine cover for Engine 256.9 In Model 167.159 

Courtesy of MERCEDES-BENZ USA

When removing and installing the engine cover (1) always make sure that only the positions shown in the picture (arrows A) are used for pulling during removal or for pressing during installation. The ball heads (3) latch there into the ball mount receptacles (4). No force may be applied at any other points on the engine cover.

Failure to observe these instructions can result in damage to the engine cover (1).