Remove/Install Speaker In Front Door - AR82.62-P-7846ME

Model 167 

MODIFICATION NOTES

21.01.2019

Operation steps added.

Operation step 4.1, 4.2, 5.

Courtesy of MERCEDES-BENZ USA

Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove door trim.		AR72.10-P-6575ME
2	Release and disconnect electrical connectors (3).
3	Remove bolts (1).
4.1	Remove trim strip (2) with switch modules.	Model 167 except code 876 (Interior Light package)
4.2	Remove trim strip (2) with switch modules until fiber-optic cable with electrical connection is accessible.	Model 167 with code 876 (Interior Light package) Do not crush or kink or subject electric lines to tension. This will result in damage to the electric lines and can impair their function.
5	Detach fiber-optic cable from trim strip (2) and remove trim strip (2).	Model 167 with code 876 (Interior Light package)
6	Remove front mid-range speaker (H20/3, H20/4, H21/3, H21/4, H22/3 or H22/4).	Long wedge	Fig 1
7	Install in the reverse order

Fig 1: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA