LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> GLS63 AMG >> Repair and Diagnosis >> Electrical >> Body Electrical >> Electrical System - Body - 167 Chassis (2 Of 3) >> Testing & Repair >> Remove/Install Rear Passenger Compartment Mobile Phone Cradle Control Unit >> Remove/Install Rear Passenger Compartment Mobile Phone Cradle Control Unit - AR82.70-P-0012ME

Remove/Install Rear Passenger Compartment Mobile Phone Cradle Control Unit - AR82.70-P-0012ME

Model 167.1 With Code 898 (Wireless telephone charging in rear passenger compartment) 

Model 167.9 With Code 898 (Wireless telephone charging in rear passenger compartment) Except Code 224 (Individual rear seats) 

G14786028Courtesy of MERCEDES-BENZ USA
Fig 1: Rear Passenger Compartment Mobile Phone Cradle Control Unit Components Location - Model 167.9 With Code 898 Except Code 224
G14786029REMOVINGINSTALLINGREFER TO SELF-DIAGNOSTIC SYSTEMSIMPORTANTIMPORTANTREFER TO SELF-DIAGNOSTIC SYSTEMSCourtesy of MERCEDES-BENZ USA
Notice  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
REMOVINGINSTALLING Remove/install     
1 Connect diagnostic unit and read out data for takeover. If the rear mobile phone cradle control unit (N123/10) is replaced.  
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-06ME
2 Remove tablet cradle electric controller unit (A105/6) with cover (1). Model 167.1 with code 447 (Touchscreen in rear) with code 898 (Wireless telephone charging in rear passenger compartment)
Model 167.9 with code 447 (Touchscreen in rear) with code 898 (Wireless telephone charging in rear passenger compartment) except code 224 (Individual rear seats)
IMPORTANT Do not remove tablet cradle electric controller unit (A105/6) from cover (1).
AR82.80-P-0001ME 
3 Push button (2) outwards and pull head restraint (3) out of armrest (4).    
4 Unhook linkage (5) from release handle (6).    
5 Remove bolts (7) on left and right side and remove cover (8).    
6 Disconnect electrical connector (9) and unclip USB port (10) at side and remove.    
7 Lift retainer (11) using a suitable screwdriver, detach gas-filled strut (12) from mount and place to one side. IMPORTANT Do not remove retainer (11).  
8 Disconnect electrical connection (13).    
9 Remove screws (14).    
10 Extend rear mobile phone cradle control unit (N123/10) (arrows) and remove.    
11 Install in the reverse order.    
12 Commission rear mobile phone cradle control unit (N123/10). If the rear mobile phone cradle control unit (N123/10) is replaced.  
REFER TO SELF-DIAGNOSTIC SYSTEMS     AD00.00-P-2000-06ME