Remove/Install Armrest On Rear Door - AR72.12-P-1020ME

Model 167 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door trim (1).		AR72.12-P-1011ME
2	Remove mat cover.
3	Unhook electric line from door trim (1).	Model 167 with code 907 (Rear armrest heater)
4.1	Drill plastic spot welds (3) and remove armrest (2).	If the armrest (2) is fastened with plastic spot welds (3). Replace drilled plastic spot welds (3) with bolts.	AR72.00-P-0001-01LW
4.2	Unscrew screws and remove armrest (2).	If the armrest (2) is fastened with screws.
5	Remove panel with electric power window switch at armrest (2).	When replacing armrest (2).
			AR72.29-P-0002ME
6	Install in the reverse order.