Remove/Install Pneumatic Pump For Multicontour Seat In Rear Passenger Compartment - AR91.25-P-0001MEX
Model 167.9
with code 406 (Multicontour rear seat)
except code M036 (Maybach version)
Shown on right rear seat
Fig 1: Left/Right Pneumatic Pump For Multicontour Seat In Rear Passenger Compartment Components Location - Model 167.9 With Code 406 Except Code M036 (Shown On Right Rear Seat)
| Topical note | Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Remove/install | |||
| 1 | Remove rear seat. | AR91.12-P-4026ME | |
| 2 | Unclip and remove trim (1). | Fig 2 | |
| 3 | Disconnect electrical connector of rear multicontour seat pneumatic pump (M25/10, M25/11) and expose electric line (2). | ||
| 4 | Remove compressed-air line (3) from rear multicontour seat pneumatic pump (M25/10, M25/11). | Fig 3 | |
| 5 | Remove rear decoupling element (4) from holder (5). | ||
| 6 | Remove front decoupling element (4) from holder (5) and move rear multicontour seat pneumatic pump (M25/10, M25/11) forward. | ||
| 7 | Install in the reverse order. |