TV Mode, Basic Function - GF82.60-P-9904A
Model All (CAR)
Overview
This document contains information on:
- General
- Function requirements
- Function
- Special features of DVR-T/DTV-T2
- Special features of ISDR-T
- Special features of HD-DMR
General
TV mode receives TV signals transmitted as electromagnetic waves and converts these into video and audio signals. The video signals are output via the central display or the front passenger display (depending on the equipment installed). The audio signals are output over the speaker system. TV mode is operated via the multimedia system's display and control elements.
Function requirements
- No smartphone connected via smartphone integration (e.g. Apple CarPlay™ or Android Auto)
- For video playback on the central display: Vehicle speed below 6 km/h
Function
The vehicle receives the TV signals as electromagnetic waves via the antennas. An antenna amplifier amplifies the signals and transmits these to multimedia system control. Multimedia system control converts the signals into video and audio signals by means of an integrated TV tuner. The speaker system outputs these audio signals via the speaker. The multimedia system outputs the video signals via the central display or the front passenger display.
Depending on the equipment installed, the following TV standards can be received and processed:
- DVR T1/DVR T2 (H.264/H.265/HEVC) (Digital Video Broadcasting - Terrestrial) (Not for vehicles with code 498 (Japan version) or code 835 (South Korea version))
- ISDR-T (Integrated Services Digital Broadcasting - Terrestrial) (For vehicles with code 498 (Japan version))
- HD-DMR/DMR (digital media broadcast) (For vehicles with code 835 (South Korea version))
Special features of DVR-T/DTV-T2
The TV tuner integrated into multimedia system control supports the following video compression standards:
- MPEG-2
- MPEG-4 AVC (H.264)
- MPEG-H (H.265)
It is possible to receive encrypted programs using a Common Interface Plus CI+ module. On vehicles without code 498 (Japan version), a CI+ card reader is also installed.
The CI+ card reader for the CI+ module is located in the glove compartment. With a valid CI+ module, fee-based, high-resolution, encrypted TV programs can also be received.
The TV tuner supports video text with Latin ASCII character sets (so currently, for example, no Greek or Cyrillic character sets).
Special features of ISDB-T
The TV tuner integrated into the multimedia system control supports video text via Broadcast Markup Language (BML) and the electronic program view (Electronic Program Guide (EPG)).
The following ISDR-T sub-standards are supported:
- "one-segment" (1seg) (low-resolution signal for mobile reception at low bandwidth)
- "full-segment" (high-resolution signal for reception at high bandwidth)
Special features of HD-DMR
The TV tuner integrated into multimedia system control supports high definition television. A device-specific CAS ID can be shown on the display. Using this CAS ID, fee-based additional services can be enabled by the program provider.
| Function schematics | |||
|---|---|---|---|
| Function schematic for radio/TV mode | Model 118.3, 177.1/9 | PE82.60-P-2502-97C | |
| Model 118.6, 177.0, 243, 247 | PE82.60-P-2502-97A | ||
| Model 167 | PE82.60-P-2502-97R | ||
| Model 206, 254 | PE82.60-P-2502-97I | ||
| Model 213.0/1, 238.3, 257, 290 as of model year 2021 | PE82.60-P-2502-97E | ||
| Model 213.2 as of model year 2021 | PE82.60-P-2502-97F | ||
| Model 223 | PE82.60-P-2502-97H | ||
| Model 232 | PE82.60-P-2502-97K | ||
| Model 238.4 as of model year 2021 | PE82.60-P-2502-97G | ||
| Model 293 | PE82.60-P-2502-97D | ||
| Model 295, 296, 297 | PE82.60-P-2502-97J | ||
| Further basic function | |||
| Antenna system, basic function | GF82.62-P-9901A |