LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2023 >> GLS450 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Electrical System - Body - 167 Chassis (2 Of 3) >> Testing & Repair >> Check Wiper Arms - AR82.30-P-6000-01ME

Check Wiper Arms - AR82.30-P-6000-01ME

Model 167, 223 

MODIFICATION NOTES

06.10.2020 Method revised. Operation steps 3.1, 3.2, 4.1, 4.2, 7.1, 7.2  
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1001-01J Angle of incidence of driver-side wiper arm in reversing position Left-hand drive vehicle ∠° -2, 0...-6, 0
Right-hand drive vehicle ∠° +2, 0...+6, 0
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 except code 874 (MAGIC VISION CONTROL, heated) Model 223 with code 874 (MAGIC VISION CONTROL, heated)
BE82.30-P-1001-01M Angle of incidence of driver-side wiper arm in reversing position Left-hand drive vehicle ∠° -3, 0...-7, 0 -2, 3...-6, 3
Right-hand drive vehicle ∠° +3, 0...+7, 0 +2, 3...+6, 3
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1002-01J Angle of incidence of passenger-side wiper arm in reversing position Left-hand drive vehicle ∠° -3, 0...-7, 0
Right-hand drive vehicle ∠° +3, 0... +7, 0
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 except code 874 (MAGIC VISION CONTROL, heated) Model 223 with code 874 (MAGIC VISION CONTROL, heated)
BE82.30-P-1002-01M Angle of incidence of passenger-side wiper arm in reversing position Left-hand drive vehicle ∠° -2, 1...-6, 1 -1, 5...-5, 5
Right-hand drive vehicle ∠° +2, 1...+6, 1 +1, 5...+5, 5
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1003-01J Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 0...+6, 0
Right-hand drive vehicle ∠° -2, 0...-6, 0
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 except code 874 (MAGIC VISION CONTROL, heated) Model 223 with code 874 (MAGIC VISION CONTROL, heated)
BE82.30-P-1003-01M Angle of incidence of driver-side wiper arm in parked position Left-hand drive vehicle ∠° +3, 0...+7, 0 +2, 5...+6, 5
Right-hand drive vehicle ∠° -3, 0...-7, 0 -2, 5...-6, 5
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 167
BE82.30-P-1004-01J Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 0...+6, 0
Right-hand drive vehicle ∠° -2, 0... -6, 0
TEST AND ADJUSTMENT VALUES FOR WIPER ARMS

Number Designation Model 223 except code 874 (MAGIC VISION CONTROL, heated) Model 223 with code 874 (MAGIC VISION CONTROL, heated)
BE82.30-P-1004-01M Angle of incidence of passenger-side wiper arm in parked position Left-hand drive vehicle ∠° +2, 7...+6, 7 +2, 7...+6, 7
Right-hand drive vehicle ∠° -2, 7...-6, 7 -2, 7...-6, 7
Fig 1: Identifying Adapter (231 589 00 21 00)
G10112396Courtesy of MERCEDES-BENZ USA
Fig 2: Identifying Adapter (205 589 00 21 00)
G10134557Courtesy of MERCEDES-BENZ USA
Fig 3: Identifying Adjusting Tool Set (211 589 02 21 00)
G11129282Courtesy of MERCEDES-BENZ USA
G11970150Courtesy of MERCEDES-BENZ USA
G14792135Courtesy of MERCEDES-BENZ USA
  1. Position wiper arms in reversing position.
  2. Remove angle gauge (A) from the adjustment tool set.
    1. Model 167, 223 with code 874 (MAGIC VISION CONTROL, heated)

      Insert SPECIAL TOOL adapter (B) into guide of angle gauge (A) and attach with screw.

    2. Model 167, 223 except code 874 (MAGIC VISION CONTROL, heated)

      Insert SPECIAL TOOL adapter (C) into guide of angle gauge (A) and attach with screw.

    1. Model 167, 223 with code 874 (MAGIC VISION CONTROL, heated)

      Slide SPECIAL TOOL adapter (B) with angle gauge (A) onto wiper blade mount of wiper arm (1) to be adjusted and attach with screw.

    2. Model 167, 223 except code 874 (MAGIC VISION CONTROL, heated)

      Slide SPECIAL TOOL adapter (C) with angle gauge (A) onto wiper blade mount of the wiper arm (1) that is to be adjusted and attach with screw.

  5. Lower wiper arm (1) to be adjusted carefully onto windshield.

    IMPORTANT All three contact points at the foot of the angle gauge (A) must make contact with the windshield.

    G12081676Courtesy of MERCEDES-BENZ USA
  6. Read off the angle of incidence of the wiper arm (1) to be adjusted on the scale of the angle gauge (A), note down and compare to the corresponding specified value.

    Model 167

    Model 167

    Model 223

    except code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    with code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    except code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    with code 874 (MAGIC VISION CONTROL, heated)

    1. Model 167, 223 with code 874 (MAGIC VISION CONTROL, heated) Raise wiper arm (1) to be adjusted and remove angle gauge (A) together with adapter (B).
    2. Model 167, 223 except code 874 (MAGIC VISION CONTROL, heated) Raise the wiper arm (1) that is to be adjusted and remove angle gauge (A) together with SPECIAL TOOL adapter (C).
  8. Raise wiper arms (1), cover with appropriate aids (scratch protection) and set down on windshield.
  9. Move wiper arms (1) to park position and remove aids (scratch protection) from wiper arms (1).

    NOTES When switching from the reversing position to the parking position, ensure that the wiper arms (1) do not touch the windshield.

    Damage can occur to the windshield otherwise.

    Shown on driver-side wiper arm (1) 

  10. Repeat test procedures 4 to 7 at the wiper arm (1) to be adjusted in parked position.

    Model 167

    Model 167

    Model 223

    except code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    with code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    except code 874 (MAGIC VISION CONTROL, heated)

    Model 223

    with code 874 (MAGIC VISION CONTROL, heated)

    Shown on driver-side wiper arm (1) 

G11970152Courtesy of MERCEDES-BENZ USA
scientia non olet · About LEMON Manuals