Remove/Install Trim At C-Pillar - AR68.30-P-4490MEX
Model 167.9
Shown on left side of vehicle except code M036 (Maybach version)
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove screw at seat belt end fitting of seat belt (1). | Model 167.9 except code M036 (Maybach version) |
*BA91.40-P-1005-01U |
| 2 | Release load compartment trim (2) in area of C-pillar trim (3). | Model 167.9 except code M036 (Maybach version) | AR68.30-P-1185MEX |
| 3 | Remove cover (4). | ||
| 4 | Unclip C-pillar trim (3) (arrows). | Fig 1 | |
| 5 | Guide seat belt (1) through opening in C-pillar trim (3) and remove C-pillar trim (3). | Model 167.9 except code M036 (Maybach version) | |
| 6 | Install in the reverse order. |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA91.40-P-1005-01U | Bolt, rear belt end fitting | Nm | 35 |