(Function Schematic For Charging - PE09.00-P-2500-97A)
Engine 608 in model 118, 177, 247
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Engine speed, signal | 11E |
| 2 | Coolant temperature sensor, signal | 11K |
| 3 | Fuel injectors, actuation | 19E |
| 4 | Boost pressure sensor, signal | 11J |
| 5 | Boost pressure positioner, actuation | 19G |
| 6 | Rail pressure sensor, signal | 11F |
| 7 | Differential pressure sensor (DPF), signal | 11H |
| 8 | Circuit 87, status | 11A |
| 9 | Temperature sensor upstream of turbocharger, signal | 11C |
| B11/4 | Coolant temperature sensor | 3K |
| B19/11 | Temperature sensor upstream of turbocharger | 3C |
| B28/8 | Differential pressure sensor (DPF) | 3H |
| B4/32 | Charge air pressure and temperature sensor | 3J |
| B4/6 | Fuel high-pressure sensor | 3F |
| B70 | Crankshaft Hall sensor | 3E |
| F152/3 | Engine compartment fuse and relay module | 3B |
| N3/9 | CDI control unit | 13G |
| Y76/1 | Cylinder 1 fuel injector | 22E |
| Y76/2 | Cylinder 2 fuel injector | 22E |
| Y76/3 | Cylinder 3 fuel injector | 22E |
| Y76/4 | Cylinder 4 fuel injector | 22E |
| Y77/1 | Boost pressure positioner | 22G |